Krieghoff K32-K80 upgrade San Remo 12ga Combo for sale…SPF

32 in top single and 30 in O&U.$6500 Will split shipping to lower 48.Krieghoff Fl did the up grade.If anyone wants more or closeup pics PM me and I can text more pics.Tom

 

Current wood on the gun as I bought it Krieghoff.

 

.

 

do you have the Stock measurements at all? Length of pull, drop at comb, and cast?

 

as I remember it is 14.25,dont have the drop or cast.Tom

 

Photo of bottom of grip ? Stock dimensions: LOP, DAC, DAH, DAMC, Cast? Amount of drop(s) are crucial to determine fit. Cast can be estimated by viewing line extending from center of rib to heel of stock. At least knowing if it is built for a RH shooter (cast-off) or for LH shooter (casr-on) is necessary to make a buying decision. If you need help for an easy, no tools (other than tape measure) method to determine drop(s) send Conversation request. Also, are all metal parts matching (barrels, forend iron, receiver)? Serial # range?; bore diameters?, choke constrictions? Any bore modifications or porting of barrels? Thanks.

 

Are two stock sets included? Interested in dimensions of both sets if included.

no, one set of wood.........MOD

 

PM me.TomTom

 

Requesting information as per #6 post.

 

I want to be accurate.I will post a pic of the bill that K Fl did to the gun.Tom

 

Guys,the receiver and forend metal match,#9882.The O&U barrel is marked A13718,the single is marked 5193.The stocks are RH.Please PM me for other pics you might want and I will give you my cell number so I can text the pics you want instead of trying to upload and post.As you can see by the bill I have owned the gun for over 10 years.I shot it almost zero as i developed a tear in my RT rotator and have not been able to shoot 12ga any longer
the reason I have been trying to thin the herd.Im sure with those barrel numbers K FL can give more info.No porting in the barrels.Tom

 

all viewers, understand, the k80 wood on the gun is not part of the deal..........MOD

 

OP: Thanks for a bit of the information requested in post #6. Still require stock dimensions, bore and choke constrictions and photo of bottom of grip cap. Not sure many buyers would be interested in custom stocked competition shotgun without knowing stock dimensions. If you can post that information I am a buyer. If not, how about sending me the shotgun to determine requested information and I'll send you a check if it fits? If not, you pay freight both ways. Seems a lot easier to post the requested information? May also want to confirm single is a K-32 barrel and O/U is a K-80 barrel?

 

I cant confirm barrels were K32 or K80!Bought the gun and barrels from Dupont K.Im going to see if they have the spec on the Dockwiller wood that was on the gun,also will give them barrels numbers to see what I could learn.Only thing I do know im right handed and the little I shot the gun I shot it very well and single and handicap.I ordered the other stock to shoot flyers.That stock and forend is out for any kind of sale at this time.If anyone wants to tell me how they want me to measure the Dockwiller stock PM me with HOW you want me to measure please.I know nothing about the barrels except the 32 single is a mod.The O&U has K chokes in the barrel and a pair in the box.Will get the numbers off all 4 of them.Also to keep this thread cleaner anyone interested can PM and will get any info or picks I can.Tom

 

OK,found my snap gauges and my Digimatic mic.I measured 2 factory choke tubes.#2 was .7125 at front end of choke and .7360 at entrance of the choke giving .235 constriction.#1 was .7165 at end of choke tube and .7365 at entrance to the choke tube for .200 constriction.I might be able to get chamber numbers on each barrel.If these numbers mean anything to anyone enjoy.I have gym in the AM and a lab appointment at 11:30.So since its a fasting test I wont be home until maybe 1:00.At that time I could get the numbers on the #1 and #2 tubes in the O&U barrels.On the single I think I can really get the numbers where the shot would leave the barrel.I took a few pics,stock is for sure cast off for a RT shooter.I have to grip cap pic.Anyone that wants what I have please PM and give me a cell number and can text what I have as uploading pics and posting.Have a good evening!And not being a master machinist I can not guarantee the number to be gnats ass EXACT! Tom

 

OK guys.What is exactly for sale in the ad is my K32 San Remo with some K80 upgrade with 30in O&U barrel and a 32in top single barrel.It will have the original Docwiller stock and forearm that was on the gun when I bought it from Dupont K. The factory K80 wood I had on it for a time is not included and is NOT for sale at this time.
If there is any questions on this post please PM me. Hope this is CLEAR enough. Tom

 

Pics of Dockwiller stock.

 

ok....i think all will understand. thanks.

 

The top single barrel mics .7035 at the muzzle.Cant get barrel measurement with my snap gauge.Will get the other K choke numbers latter this afternoon.DR stuff this AM.Tom

 

Guys,I took the gun to my Local gunsmithing store today.They are going measure the bores on the O&U and when I go to pick it up I will take the single.I will ask them to get me the numbers on the stock also.Tom

 

OK,bores on the O&U are .732-.733 on both.Bore on the single is .736.They did not get me any stock numbers,will try it myself today.Tom

 

OK,took numbers on the stock.LOP is 14.125 DAC is 1.500 and DAH is 1.375.Any questions PM me.Tom

 

TTT

 

TTT
There has to be someone out there that wants a nice Combo San Remo!Tom

 

Sale pending!Tom

 

Did you gun end up selling? An if not are you interested in any partial trades with cash for the combo?

 

Just waiting for the check.Really would not want a trade,thanks for asking.Tom