Precision Fit Stock Adjustment?

Discussion in 'Trap Talk - Americantrapshooter.com' started by 10Tenner, May 31, 2015.

  1. 10Tenner

    10Tenner New Member Founding Member

    I know that he manual says to back out the nut 10 turns as starting point. I am curious as to the number of turns you are using on the set screw. I am using 1 1/8 oz 3 dram shells. 10Tenner
     
    10Tenner, May 31, 2015
    #1
  2. wpt

    wpt Forum Leader Founding Member Forum Leader

    Do not let thr stock collapse completely ... I had enough tension to where it moved just enough to absorb the recoil and not transfer it to my shoulder ... I would check it from time to time and adjust if needed, seemed to hold the adjustment well ... WPT ... (YAC) ...
     
    wpt, Jun 1, 2015
    #2
  3. Family Guy

    Family Guy Mega Poster Founding Member

    Tenner,

    The lighter the tension the more pressure that will be put on your wrists. I put mine at 7-9 turns out. VDT says to make it much lighter.

    The most difficult thing about the pfs is knowing when to quit changing it.
     
    Family Guy, Jun 6, 2015
    #3
  4. langer

    langer Well-Known Member

    Have mine at 9 turns.
     
    langer, Jun 6, 2015
    #4
  5. oldphart

    oldphart Mega Poster Founding Member

    Most shooters have the tension set 8 to 10 turns which is about right depending on personal likes. I tried one of mine with very little tension, when you rested the gun on the pad the stock collapsed slightly it still absorbed the recoil but had a lot of travel. I usually set mine 9 to 10 turns.
     
    oldphart, Jun 7, 2015
    #5