Perazzi MT6 w/31.5" Barrels (Type 4)

This is a non-striped receiver, newer Type 4 Perazzi MT6. Some typical bluing and stock wear for it's age, but overall, in great shape...check out the pics!
Barrels are 31.5" and are marked 1.640kg with porting (don't know who did the porting). Because it is a square monobloc receiver with Type 4 forend iron, it can accept any barrels from the current production Perazzi MX8/MX12/MX2000 models. Receiver and forend iron serial numbers match, barrels do not.
Besides the Type 4 forend iron, if you check out the pic of the breechface, note that the lever lock release pin is at the 9 o'clock position (as on all current production Perazzis), and not at the 12 o'clock position as on the earlier MT6 versions with striped receivers and color case hardened receivers; this newer MT6 is virtually identical to current production MX12 and MX2000S!
The stock has a 4-way adjustable comb, a Kickeez recoil pad, and a length of pull of 14" and is either custom made, or has had a custom grip cap added on.
The lever on the gun is well to the right due to a brand new locking block and lever spring less than 100 rounds ago (I might've also replaced the firing pins and springs, but I can't remember). Trigger is also set up to reset with subgauge tubes.
It comes with 6 almost new Teague titanium chokes: 2x Extended (Cylinder), 4x Super Extended (Improved Cylinder, Light Modified, Modified, and Improved Modified)...the chokes alone go for over $500 (I think I've only ever used the IC and M chokes). The gun has two of the "Super Extended" chokes in it in the pics; the "Extended" are the same length as a Perazzi 1st gen choke.
With the fixed trigger and barrel selector on the top tang, this has been an awesome gun for sporting clays that has also worked great for trap and skeet; nothing moves like a Perazzi! $4800, plus actual shipping.
May take partial trade for Ponsness Warren 800plus toolhead/die sets for .410.

 

No longer need PW 800plus toolhead/die set for .410, but may take partial trade for one in 20ga.

 

Reduced to $4600, plus actual shipping. May take partial trade for Ponsness Warren 800plus conversion kits for 20ga and 12ga.

 

Reduced to $4400, plus actual shipping. May take partial trade for Ponsness Warren 800plus conversion kits for 20ga and 12ga.

 

Very well done presentation. Nice to see
Someone taking the time to do a professional
Narrative. Nice looking MT6.

 

TTT. Still may take partial trade for Ponsness Warren 800plus conversion kits for 20ga and 12ga.

 

No longer need a 20ga conversion kit.

 

No longer need a Ponsness Warren 800 Plus 12ga conversion kit, but could still use just the toolhead without the dies and tooling (I've got those already).