HELP with Ljutic Dynokic

Does anyone know of anyone that can or makes a modification that can be made to a Dynokic that will allow it to EJECT empty shells??? Thanks very much. Uncle Ben / Joe

 

Briley may have to resize the charmber-ljutics are not to be ammo sensitive

 

Ljutics have parts that allow or disallow ejection. There is a pin and a plate. I would think Ljutic could send you those parts.

 

Just call Mike at Ljutic !!

 

Are the fired shells being raised and not ejected or just stuck flush in the barrel?

 

The Dynokic has an extractor and does not eject. Same as my Dynatrap and my Mono gun. It's just the way they were made.

 

All 4 of my mono guns ejected. And there was a part that could be removed to lift only. There is a sliding plate and a sear that could be removed.

 

Mono guns can be changed from extract to eject but I think dynokics we’re all extract only. I could be wrong though.

I ask I was told is the factory is only working on guns that are in the mono frame. That may have changed as well.

call Phillip Crenwelge and talk to him about it.

 

Most Mono guns have a plate with 2 Allen
set screws that allow you to lock off the ejector
not un common for them to be missing