REMINGTON 1100 TRAP W/ 2 BARRELS,CASE, FOR SALE SOLD

Discussion in 'For Sale-Wanted to Buy' started by Flyersarebest, Nov 15, 2018.

  1. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Here's the package deal
    1973 Reminton1100. Stamped TRAP on the right side of receiver. Receiver date code starts with L which was used for a few years so I used the barrel code dates to determine the year of birth. It looks like the gun was shot just a few hundred shells, cleaned, then put away.

    TWO 30" barrels, both with center beads and white Bradley fronts. Both are date stamped WX so August 1973 mfg. First is stamped FULL. I don't think the previous owner ever used this barrel. You can't see even a slight mark on the extractor slot. The bore is a mirror and the bluing is 99.5%

    The second barrel is stamped MOD TRAP. It shows some light marks on the extractor slot and some shiny spots on the barrel extension from going into the receiver. I would rate this barrel a touch below the FULL one. The bore is perfect and the bluing would be 99%.

    The checkering and RKW finish on the wood is terrific. The wood is typical 1970's Remington. Not D or F grade but has some nice grain to it. The checkering is as sharp as the old pressed style can be. As I stated, I don't think this was shot very much. Of course the white spacer on the pistol grip cap has yellowed slightly. The Red Remington pad is still soft.

    I would rate the receiver metal the same 99% but for the VERY LIGHT rub marks left by the infamous "Teflon coated" metal shell catcher. The catcher is in the original bag and will of course be included along with a few extra rings for the gas system. Also includes a gold trigger shoe that fits this model. As you can see in the pic of the bolt face there haven't been many rounds through this shotgun.

    You also get an extra trigger. It is a Schwab but NOT A RELEASE. It is stamped '72. The problem I found with it was that is light enough that sometimes when you send the bolt home the hammer follows and the trigger will not fire. You will have to have this fixed on your dime. I have taken that into consideration when pricing this package.

    Lastly you get the case pictured. It could very well be a *Browning case (looks like one) but there isn't a label or emblem on it. There ARE 2 keys with it. It is also in terrific condition. No scratches or tears, just a few small spots and rub marks.
    * The case is a Hartmann, they made cases for Browning. Thanks to The Unloader for the information.

    Overall this is a really nice example of the older Remington target shotguns. You could take this one to the club and I'm sure you would get a lot of "WOW, where the heck did you find that" remarks.

    You of course have the 3 day NON FIRING period for inspection.

    $1150.00 plus shipping/Ins. to your FFL

    I will not sell the barrels separately. You get the gun, both barrels, the case, and the Schwab trigger. At the 10 picture limit so if you need more pics please ask.

    Thanks
    IMG_3184.JPG IMG_3186.JPG IMG_3187.JPG IMG_3188.JPG IMG_3189.JPG IMG_3190.JPG IMG_3191.JPG IMG_3192.JPG IMG_3193.JPG IMG_3194.JPG
     
    Last edited by a moderator: Dec 27, 2018
  2. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    The other pics of the 1100
    IMG_3200.JPG IMG_3197.JPG IMG_3195.JPG IMG_3196.JPG
     
    Last edited by a moderator: Dec 27, 2018
  3. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  4. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  5. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  6. Just Joe

    Just Joe Administrator Staff Member

    Nice to see a Schwab trigger. He made the best.
     
  7. Rob Greenside

    Rob Greenside Mega Poster

    What a gem.
     
  8. THEUNLOADER

    THEUNLOADER Mega Poster Founding Member

    That's as nice a 1100 as you will find anywhere !!! That's a HARTMAN case. They made them for Browning. Very desirable !! ( Approx $350--$400 USED !! )
     
    Duke2005 likes this.
  9. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Thank you very much for the case info.
     
  10. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  11. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  12. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  13. Sgoose

    Sgoose Mega Poster Founding Member

    Is that a pull or release trigger.

    Thanks
    Bruce
     
  14. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    It is a pull trigger
     
  15. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  16. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  17. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  18. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  19. Ronald Rousseau

    Ronald Rousseau Well-Known Member

    Where are you located for FTF
     
  20. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    South of Pgh PA

    Sorry I didn't get back to you sooner
     
  21. Ronald Rousseau

    Ronald Rousseau Well-Known Member

  22. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Since we have so many new members posting, thank you all very much, I have to bring this to the top more often.
     
  23. Passport

    Passport Well-Known Member Founding Member

    That other site is sending new members here by the dozens!

    Bless there heart
     
    Duke2005, cl3, wpt and 2 others like this.
  24. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  25. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  26. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  27. Jack Olson

    Jack Olson Mega Poster

    I would be a buyer of your trigger if you want to sell it ? Thanks
     
  28. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Thank you, not at this time. I have a few people calling about the entire package.
     
  29. Mark Russell

    Mark Russell Mr. Flinch

    The hammer not locking back should be a simple fix with a file and a stone.
     
  30. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Thanks
    If I cycle the bolt 10 times 5 or 6 of those tests result in the trigger not functioning. It moves back when I pull it but the sear wont trip and it feels like the gun is not cocked. I know it is because if I pull the bolt handle back an just an inch or so and let it reseat it works with a nice crisp trigger pull. Maybe something with the sear because I don't think pulling the bolt back just that little bit is enough to cock the hammer if it wasn't already cocked. Odd and frustrating that it works half the time.

    I would take to my gunsmith, who is a great friend that I have known for 47 years, and he would work on it right away but I also know he is busy with custom work and I don't want to impose on him. Probably a simple fix and somebody is going to get a really nice Schwab trigger for next to nothing.
     
  31. buckhunter26050

    buckhunter26050 Active Member

    Do you still have this gun I am interested
     
  32. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Yes Sir
    You can PM me if you like
     
  33. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

  34. miklbatt

    miklbatt Member

    If this is still available I'll take it.
    Mike Battista
    727 410 5212
     
  35. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader

    Thanks Mike, I'll call you tomorrow, (Sunday)
     
  36. Flyersarebest

    Flyersarebest Moderator Founding Member Forum Leader